Our Current Lead Time For Pro Series & Reds Orders Is 2-3 Weeks – Lead Time For Voston Is 1 Week.
Specifications | -Designed, Developed, Assembled & Fully Supported in Australia. -3 Year Platinum Warranty. -Fusion Valving Technology V2. -12 Clicks of Hard/Soft Damper Adjuster (Bump & Rebound together). -Camber Adjustment via top mount (where possible, see vehicle-specific details section). -Camber Washer Bottom Mounts (where possible, see vehicle-specific details section). -Damper Adjuster Extenders (where possible, see vehicle-specific details section). -Wheel travel range adjustment via the bottom mount (pre-set by MCA). -Height adjustment via spring seat position (base height adjustment is flawed). -Suggested Height Adjustment Range: depends on the specifics of the order. -Reinforced double gusseted lower mounts (where applicable, see vehicle-specific details section). -Helper Springs to keep the main spring captive at all times. -Latest Rugged Spec internal sealing designs and components. -Superior Monotube design. |
---|---|
Suitable Applications | -Street driving with a firm but adequate ride quality -Enjoyable spirited driving -High-level spirited driving -Light/Medium Motorsport usage -Factory height down to tyre up inside fender 15mm (estimate) |
Front | Coilover design, Spring rate 21kg. |
Rear | Coilover design, 20cm damper adjuster extenders, Spring rate 6kg. |
Pay with:
The MCA Pro Sports are designed to provide a high level of performance and handling with an acceptable level of comfort on the road. The minimal compromise is achieved thanks to Fusion 2.0, MCA’s latest valving, along with a more thorough and dedicated development program. Their setup has been derived from circuit racing testing for the Red Series but modified to suit a wider range of applications including street use. They feature a very wide range of height adjustment as well as hard/soft damper adjustment and camber adjustment where applicable.
The Pro Sports are internally and externally assembled here in our Brisbane Workshop. This means we have full control over the quality and accuracy of our products and our customers also get freshly assembled suspension.
Suitable Applications:
Pro Sport The MCA Pro Sports are designed to provide a high level of performance and handling with an acceptable level of comfort on the road. The minimal compromise is achieved thanks to Fusion 2.0, MCA’s latest valving, along with a more thorough and dedicated development program. Their setup has been derived from circuit racing testing for the Red Series but modified to suit a wider range of applications including street use. They feature a very wide range of height adjustment as well as hard/soft damper adjustment and camber adjustment where applicable.
The Pro Sports are internally and externally assembled here in our Brisbane Workshop. This means we have full control over the quality and accuracy of our products and our customers also get freshly assembled suspension.
Suitable Applications: