MCA Pro Stance – Toyota Chaser JZX90

Vehicle Specific Specs:

Additional information

Spring Rate	Front: 35kg Rear: 12kg
Specifications	-Designed, Developed, Assembled & Fully Supported in Australia. -3 Year Platinum Warranty. -Fusion Valving Technology V2. -12 Clicks of Hard/Soft Damper Adjuster (Bump & Rebound together). -Camber Adjustment via top mount (where possible, see vehicle-specific details section). -Camber Washer Bottom Mounts (where possible, see vehicle-specific details section). -Damper Adjuster Extenders (where possible, see vehicle-specific details section). -Wheel travel range adjustment via the bottom mount (pre-set by MCA). -Height adjustment via spring seat position (base height adjustment is flawed). -Suggested Height Adjustment Range: depends on the specifics of the order. -Reinforced double gusseted lower mounts (where applicable, see vehicle-specific details section). -Helper Springs to keep the main spring captive at all times. -Latest Rugged Spec internal sealing designs and components. -Superior Monotube design.
Suitable Applications	-Street driving with a firm but adequate ride quality -Enjoyable spirited driving -High-level spirited driving -Light/Medium Motorsport usage -Factory height down to tyre up inside fender 15mm (estimate)
Front	Coilover design, Spring rate 21kg.
Rear	Coilover design, 20cm damper adjuster extenders, Spring rate 6kg.

Overview

Key Features

Whats in the box?

Warranty

Overview

Key Features

Whats in the box?

Warranty

Description

The MCA Pro Stance suspension range is designed for extremely low ride heights. With a unique internal valving design, the Pro Stance suspension is designed to run super stiff springs, and even sit on the bump stops at ride height without excessive bounce. We’ve tested our kits right down to only 10mm of compression travel.

With that said, at more practical ride heights, the ride quality and handling characteristics that this product features are actually quite remarkable and took us by surprise. This is mostly thanks to our latest Fusion 3.0 Valving, which has assisted us in producing a much more well-rounded setup than expected. This product is a great choice for customers wanting a low street car look, right through to those wanting a slammed show car.

Features

Designed, Developed, Assembled & Fully Supported in Australia.
3 Year Transferrable, Industry Leading Warranty program.
Can be Repaired, Reconditioned, Revalved and Resprung.
MCA Proprietary Fusion Valving Technology V3.0
Extreme Low Ride Height spring rates and valving pre-selected.
Customisable spring rates by MCA depending on vehicle details.
Dyno Tuning & Testing high level of quality control.
12 Clicks of Hard/Soft Damper Adjuster (Bump & Rebound together).
Camber Adjustment via top mount (check vehicle-specific specs for more info)
Camber Washer Bottom Mounts (check vehicle-specific specs for more info)
Damper Adjuster Extenders (where possible, see additional information).
Wheel travel range adjustment via the bottom mount (pre-set by MCA).
Height adjustment via spring seat position (base height adjustment is flawed).
Suggested Height Adjustment Range: as low as the car’s wheel/suspension package can achieve.
Reinforced double-gusseted lower mounts (where applicable, see additional information).
Helper Springs to keep the main spring captive at all times.
Latest Rugged Spec internal sealing designs and components.
Superior Monotube design.