Lead times: Any orders placed between now and our end-of-year holidays may not be completed until early next year, we will still do our best to finish any new orders before the holidays. We are closed from 14/12/23 to 08/01/24.
Lead times: Any orders placed between now and our end-of-year holidays may not be completed until early next year, we will still do our best to finish any new orders before the holidays. We are closed from 14/12/23 to 08/01/24.
| Spring Rate | Front 14kg, Rear 14kg. |
|---|---|
| Front | Non-inverted strut design, camber tops, camber washer bottom mounts, Sway bar links supplied, MCA Shock Shield compatible, Stanceparts air cups, Front sway bar needs to be removed to work with front air cups. |
| Rear | Coilover design, MCA Shock Shield Compatible. |
| Air Cup Kit Pair | Pair only kits come with air cups pair, compressor, air lines and all wiring required to run the air cups. |
| Air Cup Kit Front and Rear | Complete kit front and rear, comes with 4 air cups, compressor, tank and all air lines and wiring to run the full set. |
The MCA Pro Stance suspension range is designed for extremely low ride heights. With a unique internal valving design, the Pro Stance suspension is designed to run super stiff springs, and even sit on the bump stops at ride height without excessive bounce. We’ve tested our kits right down to only 10mm of compression travel.
With that said, at more practical ride heights, the ride quality and handling characteristics that this product features are actually quite remarkable and took us by surprise. This is mostly thanks to our latest Fusion 3.0 Valving, which has assisted us in producing a much more well-rounded setup than expected. This product is a great choice for customers wanting a low street car look, right through to those wanting a slammed show car.
Suspension
Air Cups (if applicable)
The MCA Pro Stance suspension range is designed for extremely low ride heights. With a unique internal valving design, the Pro Stance suspension is designed to run super stiff springs, and even sit on the bump stops at ride height without excessive bounce. We’ve tested our kits right down to only 10mm of compression travel.
With that said, at more practical ride heights, the ride quality and handling characteristics that this product features are actually quite remarkable and took us by surprise. This is mostly thanks to our latest Fusion 3.0 Valving, which has assisted us in producing a much more well-rounded setup than expected. This product is a great choice for customers wanting a low street car look, right through to those wanting a slammed show car.
Suspension
Air Cups (if applicable)
2 year warranty.
