Designed, Developed & Assembled To Order In Australia

MCA Pro Sport suspension kit with Stanceparts air cups – Nissan Skyline R34 GT-T

MCA Pro Sport suspension kit with Stanceparts air cups – Nissan Skyline R34 GT-T

Set / Pair

MCA Shock Shield

Stanceparts air cups

Clear

Air cups allow you to raise the car at a push of a button, this helps low cars over obstacles like driveways and speed bumps. For more information on air cups please go to mcasuspension.com/aircups/

Briefly tell us about your intended use to help us be sure you've ordered the correct product.*

Handling Modifications*

Vehicle Specific Specs:

Additional information

Spring Rate	Front 11kg, Rear 4.5kg.
Front	Coilover design, MCA Shock Shield Compatible.
Rear	Coilover design, Fork rear bottom mount, 20cm damper adjuster extenders, MCA Shock Shield Compatible.
Stanceparts air cup kits	Air cups allow you to raise the car temporarily at the click of a button, this helps low cars navigate speed bumps and steep driveways. Both the full kit and front only come with everything you need to install and run air cups from Stanceparts, PLEASE NOTE: we build the suspension to work with air cups and fit the air cup to the suspension however you will need to install the rest of the kit yourself (tank, compressor, air lines and wiring etc).

Overview

Key Features

Whats in the box?

Warranty

Overview

Key Features

Whats in the box?

Warranty

Description

Pro Sport The MCA Pro Sports are designed to provide a high level of performance and handling with an acceptable level of comfort on the road. The minimal compromise is achieved thanks to Fusion 3.0, MCA’s latest valving, along with a more thorough and dedicated development program. Their setup has been derived from circuit racing testing for the Red Series but modified to suit a wider range of applications including street use. They feature a very wide range of height adjustment as well as hard/soft damper adjustment and camber adjustment where applicable.

The Pro Sports are internally and externally assembled here in our Brisbane Workshop. This means we have full control over the quality and accuracy of our products and our customers also get freshly assembled suspension.

Suitable Applications:

Street driving with a firm but adequate ride quality.
Enjoyable spirited driving.
High-level spirited driving.
Light/Medium motorsport use.
Factory height down to a tyre inside fender of ~15mm (estimate).

Features

Designed, Developed, Assembled & Fully Supported in Australia.
3 Year Transferrable, Industry Leading Warranty program.
Can be Repaired, Reconditioned, Revalved and Resprung.
MCA Proprietary Fusion Valving Technology V3.0.
Pre-selected valving and spring package.
Dyno Tuning & Testing high level of quality control.
12 Clicks of Hard/Soft Damper Adjuster (Bump & Rebound together).
Camber Adjustment via top mount (check vehicle-specific specs for more info).
Camber Washer Bottom Mounts(check vehicle-specific specs for more info).
Damper Adjuster Extenders (where possible, see additional information).
Wheel travel range adjustment via the bottom mount (pre-set by MCA).
Height adjustment via spring seat position (base height adjustment is flawed).
Suggested Height Range: between factory height and 15mm tyre tuck (depends on vehicle specifics).
Reinforced double-gusseted lower mounts (where applicable, see additional information).
Helper Springs to keep the main spring captive at all times.
Latest Rugged Spec internal sealing designs and components.
Superior Monotube design.