Lead times: Voston 1-2 weeks. Pro Series and Reds 2-3 weeks.

!!!MCA MID YEAR BREAK SALE!!!   20/06/24  –  07/07/24
Our office and workshop will be closed during this period, but we will be contactable via our Contact Us Form.

MCA Pro Drag – Toyota Chaser JZX90

MCA Pro Drag – Toyota Chaser JZX90

Vehicle Specific Specs:

Additional information

Spring Rate

Front: 21kg Rear: 6kg

Specifications

-Designed, Developed, Assembled & Fully Supported in Australia. -3 Year Platinum Warranty. -Fusion Valving Technology V2. -12 Clicks of Hard/Soft Damper Adjuster (Bump & Rebound together). -Camber Adjustment via top mount (where possible, see vehicle-specific details section). -Camber Washer Bottom Mounts (where possible, see vehicle-specific details section). -Damper Adjuster Extenders (where possible, see vehicle-specific details section). -Wheel travel range adjustment via the bottom mount (pre-set by MCA). -Height adjustment via spring seat position (base height adjustment is flawed). -Suggested Height Adjustment Range: depends on the specifics of the order. -Reinforced double gusseted lower mounts (where applicable, see vehicle-specific details section). -Helper Springs to keep the main spring captive at all times. -Latest Rugged Spec internal sealing designs and components. -Superior Monotube design.

Suitable Applications

-Street driving with a firm but adequate ride quality -Enjoyable spirited driving -High-level spirited driving -Light/Medium Motorsport usage -Factory height down to tyre up inside fender 15mm (estimate)

Front

Coilover design, Spring rate 21kg.

Rear

Coilover design, 20cm damper adjuster extenders, Spring rate 6kg.

Overview

Whilst Drag Racing is not a motorsport that MCA Suspension is well known for, we have actually had a lot of success with top-level teams running in the 6s. We decided to take this success and experience and use it to develop drag racing-specific products for a wider range of vehicles. This resulted in the MCA Suspension Pro Drag product.

Designed specifically for Drag Radials used on prepped track surfaces,
thanks to our latest Fusion V3.0 Valving, we’ve managed to design a
product versatile enough to also be used on unprepared surfaces as well
as Roll Racing events.

Product Summary

  • Assembled to order in Australia
  • Roll Racing for prepped and unprepped surfaces (softer clicks)
  • Drag Racing for prepped and unprepped surfaces (firmer clicks)
  • Useable on the street with a firm, but not harsh ride quality
  • Medium-level spirited driving
  • Height adjustment range of factory height down to top of tyre level with fender (estimate)
  • Uses a pre-determined valving and spring packaged from our MCA Reds product
  • Spring rates can be tweaked by MCA to suit the vehicle’s specific setup

Key Features

  • Designed, Developed, Assembled & Fully Supported in Australia.
  • 3 Year Transferrable, Industry Leading Warranty program.
  • Can be Repaired, Reconditioned, Revalved and Resprung.
  • MCA Proprietary Fusion Valving Technology V3.0
  • Drag Racing / Roll Racing spring rates and valving pre-selected.
  • Customisable spring rates by MCA depending on vehicle details.
  • Dyno Tuning & Testing high level of quality control.
  • 12 Clicks of Hard/Soft Damper Adjuster (Bump & Rebound together).
  • Camber Adjustment via top mount (check vehicle-specific specs for more info)
  • Camber Washer Bottom Mounts(check vehicle-specific specs for more info)
  • Damper Adjuster Extenders (where possible, see additional information).
  • Wheel travel range adjustment via the bottom mount (pre-set by MCA).
  • Height adjustment via spring seat position (base height adjustment is flawed).
  • Suggested ride height range: from factory to top of tyre level with the fender. 
  • Reinforced double-gusseted lower mounts (where applicable, see additional information).
  • Helper Springs to keep the main spring captive at all times.
  • Latest Rugged Spec internal sealing designs and components.
  • Superior Monotube design.

In the Box

  • Complete Suspension System.
  • Height Adjustment Tools.
  • Setup Sheet.
  • Information Sheets.
  • MCA Stickers.
  • MCA  Lanyard.

Warranty

Suspension

  • 3 year warranty.
  • Covers motorsport use.
  • Exchange program possible.
  • Repaired in Australia.

 

Air Cups (if applicable) 

  • 2 year warranty.