Lead times: Any orders placed between now and our end-of-year holidays may not be completed until early next year, we will still do our best to finish any new orders before the holidays. We are closed from 14/12/23 to 08/01/24.

Designed, Developed & Assembled To Order In Australia

MCA Pro Comfort suspension kit with Stance- Nissan Skyline R34 GT

MCA Pro Comfort suspension kit with Stance- Nissan Skyline R34 GT

Vehicle Specific Specs
& Spring Rates:

Additional information

Spring Rate

Front 9kg, Rear 3.5kg

Front

Coilover design, MCA Shock Shield Compatible.

Rear

Coilover design, Eyelet rear bottom mount, 20cm damper adjuster extenders, MCA Shock Shield Compatible.

Stanceparts air cups

Air cups allow you to raise the car temporarily at the click of a button, this helps low cars navigate speed bumps and steep driveways. Both the full kit and front only come with everything you need to install and run air cups from Stanceparts, PLEASE NOTE: we build the suspension to work with air cups and fit the air cup to the suspension however you will need to install the rest of the kit yourself (tank, compressor, air lines and wiring etc).

Overview

The MCA Pro Comforts are designed to provide a high level of comfort (in some cases close to or better than OEM) but whilst also incorporating a very enjoyable level of handling for street applications with a good range of height adjustment.

The minimal compromise achieved is thanks to Fusion 3.0, MCA’s latest valving, along with a more thorough and dedicated development program. The Pro Comforts also feature hard/soft damper adjustment as well as camber adjustment where applicable.

The Pro Comforts are internally and externally assembled here in our Brisbane workshop. This means we have full control over the quality and accuracy of our products and our customers also get freshly assembled suspension.

Suitable Applications:

  • Comfort focused street driving.
  • Light spirited driving with improved handling over OEM.
  • Ride height adjustment down to 10mm tyre to fender gap (can vary per vehicle).

Key Features

  • Designed, Developed, Assembled & Fully Supported in Australia.
  • 3 Year Transferrable, Industry Leading Warranty program.
  • Can be Repaired, Reconditioned, Revalved and Resprung.
  • MCA Proprietary Fusion Valving Technology V3.0 Pre-selected valving and spring package.
  • 12 Clicks of Hard/Soft Damper Adjuster (Bump & Rebound together).
  • Camber Adjustment via top mount (check vehicle-specific specs for more info).
  • Camber Washer Bottom Mounts(check vehicle-specific specs for more info).
  • Damper Adjuster Extenders (where possible, see additional information).
  • Wheel travel range adjustment via the bottom mount (pre-set by MCA).
  • Height adjustment via spring seat position (base height adjustment is flawed).
  • Suggested Height Range: between factory height and 20mm tyre gap (depends on vehicle specifics).
  • Reinforced double-gusseted lower mounts (where applicable, see additional information).
  • Helper Springs to keep the main spring captive at all times.
  • Latest Rugged Spec internal sealing designs and components.
  • Superior Monotube design.
  •  

In The Box

  • Complete Suspension System.
  • Height Adjustment Tools.
  • Setup Sheet.
  • Information Sheets.
  • MCA Stickers.
  • Black MCA Wrist Lanyard.

Warranty

Suspension

  • 3 year warranty.
  • Warranty covers motorsport use.
  • Exchange program.
  • Repaired in Australia.

 

Air Cups (if applicable)

  • 2 year warranty.